Intrax Racing Springs / Custom Springs  [看中文版]

For hundreds of different types of cars we deliver springs from stock. By using these springs the handling and the looks of the car of the car improves. On average a car is lowered 30 to 40mm on the front- and rear side.

This lowering is optimized per car type and engine fitted. For popular cars we have different sets in the program, for example to give a 40/40, 40/60 (to create a wedge shape silhouette) or 60/60 mm lowering.

Upon request, we can press the springs to every height. Intrax can also develop tailor made springs in all sizes, shapes, stiffness, colors and prints: either under the Intrax label, as a one-off, or for your private label.

Lowering your car is nice for the esthetics and helps a little bit for the car handling because you lower the centre of gravity.

For most of the cars Intrax has lowering springs on stock.

CLICK HERE FOR ALL LOWERING SPRINGS WE HAVE

[email protected]

If you are already the proud owner of a good coil-over set but you need other springs, ask Intrax. We have a very large stock of springs, harder, softer, longer or shorter. We have it.

Intrax has a very large stock of screw sets / race springs of excellent quality. The springs are made from chromium-silicon steel with a higher material tension. This allows the desired spring tension with much less material, resulting in a weight advantage and more travel in the spring.

An inner diameter of 60mm is the most commonly used and that is why we have the widest choice for that type. We do, however, also offer springs with the following diameters:
Ø 46mm, Ø 51mm, Ø 54mm, Ø 60mm, Ø 70mm, Ø80mm.

If you cannot find the right spring, then email us or give us a call. We can manufacture any type of spring you need.

  • Length <- 330mm with Ø 46, 51, 54 or 60mm
  • Length 330mm-450mm with Ø 46, 51, 54 or 60mm
  • Length 450mm-490mm with Ø 45, 51, 54 or 60 mm 
  • Length 500mm -> with Ø 46, 51, 54 or 60mm
  • Length <- 330mm with Ø 70 or 80mm
  • Length 330mm-450mm with Ø 70 or 80mm
  • Length 450mm-490mm with Ø 70 or 80mm
  • Length 500mm -> with Ø 70 or 80mm
  • Custom made springs (Contact Us)

FOR THE LIST OF Ø 46, 51, 54, 60, 70 AND 80MM SPRINGS CLICK HERE.

[email protected]


Comments are closed.